Philips 150B3V - Manual (Page 71)

USB Hub
USB Hub: About this product • Installation
About this product
Package Contents
Each package should include the following parts:
1 USB 4-port Clip-On HUB ●
1 USB cable
●
1 Switching AC Adapter
●
1 Owner's manual
●
Features
Fulfill the USB-IF Specification Revision 1.1 and HID Class Definition Rev. 1.0 ●
Support up to 127 USB devices simultaneously.
●
Stand-alone or clip-on to Philips monitor range.
●
Support for realtime dynamic insertion and removal.
●
1 Upstream port and 4 Downstream ports.
●
Over current protection on all downstream ports. ●
Self-powered by using the supplied AC Adapter or Bus-powered through USB bus.
●
Identification
1) Power LED: Red light is lit when
power is supplied.
2) LEDs: Green light is lit for each of the
ports when they are connected and
active.
USB Hub
file:///D|/03771/english/150b3ev/install/usb.htm (1 of 4) [9/13/2002 12:39:37 PM]