Planar E2C - Manual (Page 12)

2 | Dome E2c Display
Display Components
Review this illustration of the back panel to identify controls and
ports on the display unit.
Legend
1 Reset. Restores the display configuration to default.
2 LED. Shows display status.
3 DIN 8-pin connector. Drives power to the display.
4 S-Video, separate video analog input port. Requires a 4-pin
mini-DIN connector.
5 C-Video, composite video analog input port. Requires an RCA or
phono connector.
6 DVI. DVI-I video input port. Supports DVI-D digital or VDVI-A analog
video. Requires DVI connector.
7 VGA. VGA video analog input port. Requires an HD15 D-Sub or
VGA connector.
1 4 3 2 7 6 5