Panasonic SC-PT465 User Manual

Page 37

rou

lesho

ng gu

TX00

(Continued on next page)

Disc operation

It takes time before play starts.

≥ Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the

correct play time will not be displayed. This is normal.

[MP3]

≥ This is normal on DivX video. [DivX]

—

A menu screen appears during
skip or search.

[VCD]

≥ This is normal for Video CDs.

—

Playback control menu does not
appear.

[VCD] with playback control

≥ Press [∫ STOP] twice and then press [1 PLAY].

—

Program and Random play do not
work.

[DVD-V]

≥ These functions do not work with some DVD-Videos.

—

Play does not start.

≥ This unit may not play WMA and MPEG4 that contains still picture data.
≥ If playing DivX VOD content, refer to the homepage where you purchased the DivX VOD content.

(Example: www.divx.com/vod)

[DivX]

≥ If a disc contains CD-DA and other formats, proper playback may not be possible.

—
—

—

No subtitles.

≥ Display the subtitles. (“SUBTITLE” in Menu 1)
≥ Subtitles may not be displayed depending on the disc. [DivX]

—

Point B is automatically set.

≥ The end of an item becomes point B when it is reached.

—

The Setup menu cannot be
accessed.

≥ Select “DVD/CD” as the source.
≥ Cancel Program and Random play.

—

Sound

Sound is distorted.

≥ Noise may occur when playing WMA.
≥ When using the HDMI output, audio may not be output from other terminals.

—
—

Effects do not work.

≥ Some audio effects do not work or have less effect with some discs.

—

Humming is heard during play.

≥ An AC mains lead or fluorescent light is near the main unit. Keep other appliances and cables away

from the main unit.

—

No sound.

≥ There may be a slight pause in sound when you change the play speed.
≥ Audio may not be output due to how files were created. [DivX]
≥ Audio may not be heard when more than 4 devices are connected with HDMI cables. Reduce the

number of connected devices.

≥ When using the HDMI connection, ensure that “AUDIO OUT” in the “HDMI” menu is set to “ON”.

—
—
—

No sound from the TV.

≥ Confirm the audio connection. Press [FM/EXT-IN] (

[PT460]

: [EXT-IN]) to select the corresponding

source.

10,

No surround sound.

≥ Press [ÎPLII] to turn on Dolby Pro Logic II or turn on Surround Enhancer.

Picture

The picture on the TV is not
displayed correctly or disappears.

≥ The unit and TV are using different video systems.

[Southeast]Asia]and]Thailand] Use a multi-system or NTSC TV.
[Others] Use a multi-system or PAL TV.

≥ The system used on the disc does not match your TV.

– PAL discs cannot be correctly viewed on an NTSC TV.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV (“NTSC DISC OUT” in

“VIDEO” menu).

≥ Ensure that the unit is connected directly to the TV, and is not connected through a video cassette

recorder.

≥ Mobile telephone chargers can cause some disturbance.
≥ If you are using an indoor TV antenna, change to an outdoor antenna.
≥ The TV antenna wire is too close to the unit. Move it away from the unit.
≥ Change “SOURCE SELECT” in Menu 2. [DivX]
≥ Picture may not be seen when more than 4 devices are connected with HDMI cables. Reduce the

number of connected devices.

≥ When using the COMPONENT VIDEO OUT terminal, ensure that progressive output is not

selected when the connected TV is not progressive compatible. Press and hold [CANCEL] until
“PRG” disappears from the main unit display and the picture is displayed correctly.

≥ When using the HDMI AV OUT terminal, ensure that video output unacceptable with the connected

TV is not selected. Press and hold [CANCEL] until the picture is displayed correctly. (The output will
return to “480p” or “576p”.)

≥ Video images converted to 1920k1080 resolution may look different from the true, native 1080p

full-HD sources. This is not malfunction of the main unit.

—

—
—
—

—

PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book Page 37 Thursday, December 13, 2007 9:04 AM

This manual is related to the following products:

sc-pt460