Panasonic BB-HNP60 - Manual (Page 34)

Operating Instructions
34
Instructions for the data fields
Camera Type Select the Network Camera type (with Pan/Tilt feature, without Pan/
Tilt feature or with zooming feature).
IP address Enter the IP address of Network Camera.
Enter "IP address (or domain name):Port number".
(When port number is 80 [default], you do not need to enter port
number.)
• Enter the alphanumeric characters.
Camera Name Enter Camera Name.
• Maximum 250 characters including a path name of a folder
• [\], [/], [:], [.], [;], [*], [?], ["], [<],[>] and [|] are not available.
Description Enter the information of Network Camera.
• Maximum 128 characters
Resolution Select 640 x 480, 320 x 240 (default) or 160 x 120.
Image Quality Select Favor Motion, Standard (default) or Favor Clarity.
Capture Type Select Motion Image or Still Image. Intervals should be set over
0.5 seconds.
• You may not monitor or record at the specified intervals
depending on the recording situations.
Recording File
Format Select a recording file format.
• JPG creates JPEG files. The number of continuous recorded
images are limited. MJP is recommended when recording a
motion image or still images at short intervals.
• MJP creates an MJP file. MJP puts continuous JPEG files
together every hour.
Recording Select Off, On or Motion Detect.
Timer
Operation Set the date of recording. Select the date and a day of the week.
If the setting time passes over midnight, check the day of start time.
• Select [On] or [Motion Detect] for recording type. Images are
recorded when detecting motions, when selecting [Motion
Detect].