Planar PL120 - Manual (Page 11)

Chapter 1
3
select the function group. The 2 nd button allows you to select
one of the control functions within each function group.
3. Adjustment Control Buttons
These two buttons allow you to adjust the selected control
function to accommodate your specific working environment.
Press the upper button to increase the setting of the selected
control function and press the lower button to decrease the
setting of the selected control function.
4. Power Switch
Push the power switch to turn the Monitor on/off.
5. Power-On Indicator
This LED indicator lights when the power is on. The LED
indicator will blink when the LCD Monitor is in Power Saving
mode.
6. Monitor Stand
The Monitor Stand supports the LCD Panel.