Perception Digital JUKEBOX PD - 450 - 01 - Manual (Page 13)

13
2. USING CDRW Jukebox
2.1 Learning the Operations
This section guides you step by step to the functions, features and operations of
the CDRW Jukebox using the remote. Buttons share on the main unit operates
the same as the remote.
2.1.1 Powering On-Off
Power On
(1) Turn on the MAIN POWER switch at the back of CDRW Jukebox.
(2) Press POWER to turn on the Jukebox. It will go through a system
checking progress.
Power Off
(1) Press POWER once to turn off the Jukebox. It will go into sleep mode.
(2) If necessary to turn off the Jukebox completely, turn the MAIN POWER
switch off at the back of the Jukebox. However, it is not recommended to
do it everytime after use.
Note: After power off, the Jukebox will enter a OS back up mode. It is only a
system maintenance process, do not be alarmed. You can abort this and
resume operation by pressing the power key again. Or you can just let it run
though the program.
Power On from Sleep Mode
(1) The Jukebox will enter a sleep mode if not in operation. To resume,
press POWER once to wake up the jukebox.