Plinius Audio 8200 MkII - Manual (Page 6)

6
PLINIUS 8200
RECORD SOURCE VOLUME
x x x
TUNER
TAPE 1
TAPE 2
STANDBY
CD
PHONO
The front of the Plinius 8200 Integrated Amplifier incorporates all the facilities
you will require on a daily basis.
F
RONT
P
ANEL
L
AYOUT
S
HOWING
V
OLUME
K
NOB
, R
ECORD
A
ND
S
OURCE
S
ELECTORS
, D
ISPLAY
LED’
S
A
ND
M
AINS
S
WITCH
MAINS SWITCH
The heavy-duty rocker switch to the left of the panel turns the Mains/Line Power to the amplifier ON or
OFF. Depress the right hand side of the switch to turn the amplifier on. The amplifier draws a moderately
high current when switched on, so it is not good practice to rapidly turn the Mains switch on and off
repeatedly.
POWER LED
An LED in between ‘PLINIUS 8200’ indicates that the power is on. When first switched on, the power LED
will pulse for ten seconds - this is an initialisation sequence, after which the power LED remains lit during
the time the amplifier is powered on.
SOURCE SELECTOR
This rotary switch enables selection of any of the five different inputs available on the back panel. This
selection is fed to the speakers via the output posts on the rear of the amplifier. Note that in standby
mode no input is selected.