Operating sequence, Measure out the fabric softener, Select the required option(s) – Prima Donna Designs LPR 721 User Manual
Page 8: Select the required programme, Load the laundry, Measure out the detergent
8
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
4. Select the required option(s)
Depress SPIN REDUCTION
and/or QUICK WASH
and/or RINSE HOLD
button, if required.
5. Select the required programme
Turn the programme selector dial clockwise to the
programme B or A (if you wish to perform a prewash).
P0429S
B
PROGRAMMES
QUICK
WASH
RINSE
HOLD
HALF
LOAD
SPIN
REDUCTION
P0005
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 5 KG OF WHITE COTTON AT 95°C
Suppose you have 5 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.
1. Load the laundry
Open the door by pulling the catch outward.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
If you wish to carry out the prewash, pour detergent into
the compartment marked
.
P0006
P0004