Philips DC190 - Manual (Page 10)

2
Connect the other end of the AC adaptor to the wall outlet.
Set clock
1
In standby mode, press and hold TIME SET/AUTO SCAN for
2 seconds.
The hour digits begin to blink. »
2
Press TUNING +/- to set the hour.
3
Press TIME SET/AUTO SCAN.
The minute digits begin to blink. »
4
Press TUNING +/- to set the minute.
5
Press TIME SET/AUTO SCAN to confirm.
The week day digits begin to blink. »
6
Press TUNING +/- to set the week day.
7
Press TIME SET/AUTO SCAN to confirm.
Turn on
1
Press .
The unit switches to the last selected source. »