Panasonic KX-TG2631AL - Manual (Page 47)

Useful Information
47
Making/answering calls, intercom
*1 KX-TG2632
Problem Cause/solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L
Move the handset and the base unit away from other
electrical appliances.
L
Move closer to the base unit.
L
Raise the base unit antenna.
L Turn on the clarity booster feature (page 20).
L
If your unit is connected to a telephone line with ADSL
service, we recommend connecting a noise filter
between the base unit and the telephone line socket.
Contact your ADSL provider for details.
The handset does not
ring.
L
The ringer volume is turned off. Adjust it (page 31).
I cannot make a call.
L
The base unit or another handset is in use. Try again
later.
*1
L
Dial lock is turned on. To turn it off, see page 20.
L If the above remedies do not solve the problem, set the
dialling mode. Press {MENU} {0} {5} {1} {Save}
{
OFF}.
L The unit is not designed to be used with rotary (pulse
dialling) services.
I cannot redial by
pressing {REDIAL}.
L
If the last number dialled was more than 48 digits long,
the number will not be redialled correctly. Dial the
number manually.
L
Dial lock is turned on. To turn it off, see page 20.
I cannot have a
conversation using the
headset.
L
Make sure that an optional headset is connected
properly (page 43).
L If “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
L
We recommend using the Panasonic headset noted on
page 5.
I cannot page the
handset. L The called handset is too far from the base unit.
L
The called handset is in use. Try again later.
I cannot page the base
unit.
L
The base unit is in use. Try again later.
TG2631AL_2632AL.book Page 47 Monday, February 20, 2006 2:54 PM