PYLE Audio PLPK5TVD - Manual (Page 13)

13
Note: When you set the color mode to “PAL” in SYSTEM MENU, there is no “TINT”
item to display.
In this menu, the range of setting value is 00~63, and the recommended range of
these values are listed below:
BRIGHT: 10~32
CONTRAST: 20~40
COLOR: 40~50
SHARP: 63
TINT: 10
TUNER MENU
--POSITION --
POSITION setup
You can use numeric buttons to input the TV channel number. For example, you
input 8, when you turn off the unit and then turn it on again, the program of channel
8 will be displayed.
--SKIP--
SKIP setup
You can use CONTROL+ button (19) or CONTROL– button (20) to switch between
ON and OFF.
If you set the position to 8 and select SKIP to ON, when you press CH+ button (9)
or CH– button (10) to choose channel, the channel 8 will be skipped.
TUNER MENU
POS 1
SKIP ON
BAND UHF
FINE
AFT
OFF
SEARCH
ASM
TUNER MENU
POS 1
SKIP ON
BAND UHF
FINE
AFT
OFF
SEARCH
ASM