Parkside PLBS 30 - Manual (Page 13)

14 GB/IE/CY
Operation
© Operation
© Switching on and off
Switching on:
˽
Insert the mains plug into a suitable mains socket.
Switching off:
˽
Pull the plug out of the mains socket to switch off the device.
© Third hand
CAUTION! DANGER OF BURNS! The clips on the
third hand 5 can become hot while you are soldering the
workpiece.
1. Fold out the third hand 5 upwards.
2. Rotate the clips 4 until they are oriented in the required direction.
3. Clamp the workpiece between the two clips 4 .
© Solder sponge
CAUTION! The hot soldering tip 2 must never be placed in
contact with a dry solder sponge 8 , otherwise the solder sponge
may be damaged.
˽
The solder sponge 8 is used to clean soldering tips.
˽
Moisten the solder sponge 8 before you use it.