Porter-Cable KALA 300 - Manual (Page 6)

4
Installing your telephone
✦ Inserting / Replacing battery / Telephone connection
✦ Charging / Recharging the telephone (See battery status icon on page 2.)
On first use or when inserting a new battery, charge the battery with the handset for at
least 24 hours. This ensures optimal battery life reached after 3 cycles of charge/uncharge.
The battery needs to be charged if you hear a beep when using the telephone.
Warning :To insert the battery and/or to connect your telephone, please refer
to the drawings printed on the inside cover and on the lip inside the box.
Warning : If you live in the country in the table below, you must enter the relevent
configuration code using the key sequence shown followed by your country code.
✦ Configuring the phone for use
Country
Rep. of Ireland
Code
153
Northern Ireland
UK
44
44
Advice : If you have bought your product in any of the above countries but want to use it
in another one, you can enter the configuration code, according to the above tables, in
order to activate the right country settings.
Warning : This product is ONLY designed to be
used in countries LISTED below.
WXYZ WXYZ
WXYZ WXYZ
For Example to configurate for Republic of Ireland :
dial 153
WXYZ WXYZ
Don’t change your configuration code if you live in one of the countries in the top part
of the table below. Your product is already factory configured with the right settings.
With the help of the installation drawings :
● Open the battery door by sliding it down,
● Connect the battery pack to the connector inside the handset,
● Place the battery with sticker face up and wires along the left side of the
battery pack,
● Replace the battery door.
Kala 300 master UK indice 2.qxd 27/09/02 10:40 Page 4