Polk Audio Lsi Series User Manual
Page 11

SURROUND AND CENTER LOUDSPEAKERS
LSi F/X*
LSi
C
*
Driver Complement
2 - 5 1/4" (13.3cm) Dynamic Balance mid/bass drivers
2 - 5 1/4" (13.3cm) Dynamic Balance mid/bass drivers
2 - 1" (2.5cm) Dynamic Balance Ring Radiator tweeters
1 - 1" (2.5cm) Dynamic Balance Ring Radiator tweeter
Frequency Response: Overall / -3dB Limits
40Hz - 27kHz / 52Hz - 26kHz
40Hz - 27kHz / 52Hz - 26kHz
Impedance
compatible with 4 Ohms outputs
compatible with 4 Ohms outputs
Recommended Amplification
20 - 200 Watts / channel
20 - 200 Watts / channel
Efficiency
88dB
88dB
Available Finish
high gloss black
high gloss black
Shipping Weight (+/- 3 lbs/kgs)
55 lbs/pair (24.9 kg)
25 lbs/each (11.3 kg)
Dimensions
15"H x 13 1/4"W x 10"D
7"H x 21 3/4"W x 9"D
38.1cm H x 33.6cm W x 25.4cm D
17.8cm H x 55.2cm W x 22.8cm D
Features
switchable bipole/dipole, PowerPort, dual gold-plated
PowerPort, ARC Port, magnetic shielding*, dual gold-plated
5-way binding posts, bi-amp/bi-wire terminals
5-way binding posts, bi-amp/bi-wire terminals
POWERED SUBWOOFERS
PSW1000*
Driver Complement
2 - 10" (25cm) woofers
Amplifier
400 watts into 2 Ohms
Continuous Average Power**
with <1% THD, 20 - 145Hz
Subwoofer Amp Dynamic Power
825 Watts
Port Type
slot loaded PowerPort
Frequency Response: Overall / -3dB Limits
20Hz - 160Hz / 30Hz - 125Hz
Crossover Frequency
adjustable 50Hz - 140Hz
Inputs
speaker, line level & LFE
Outputs
speaker level, pass through or 80Hz high pass filter (switchable).
Line level, high pass filter fixed at 80Hz.
Available Finish
high gloss black, ebony or cherry side panels
Shipping Weight (+/- 3 lbs/kgs)
81 lbs/ea (36.7 kg)
Dimensions
16 3/4" H x 16 7/8"W x 19 3/8"D
(Including Grille, Heat Sink, Binding Posts)
42.5cm H x 42.8cm W x 49.2cm D
Features
Auto on/off, unfiltered LFE input, PowerPort, magnetic shielding*, speaker
& low level inputs, front panel volume & crossover controls, dual gold-plated
5-way binding posts, +3 db bass boost, 1 1/2" cabinet baffles.
* Magnetically shielded components for safe placement near TVs or video monitors.
** About Power Ratings:
The Federal Trade Commission has issued new regulations regarding the power ratings of all amplifiers, including self-powered speakers. Polk Audio supports this effort to standardize
power testing methods in order to provide consumers with a “level playing field” basis for comparison. Note, however, that the FTC rating is based on the “Continuous Power” output
of the amplifier. Music and movies are rarely “continuous” but are mainly composed of short bursts of sound. For this reason we also supply a “Dynamic Power” rating that measures
the ability of the amplifier to produce power in short bursts similar to those found in music and movies. In our experience, an amplifier with higher Dynamic Power output will play louder
under most conditions regardless of the continuous power rating.
We’re fanatics when it comes to providing you useful, accurate information that can help you evaluate our products. But as we all know, we live in an imperfect world. At least some of us do.
That’s why performance specifications and product dimensions are subject to change without notice. For the most current specifications see our website, www.polkaudio.com/home.
Polk Audio is a Directed Electronics company which trades on NASDAQ under the symbol DEIX. Investor information can be found at http://investor.directed.com.
Polk Audio, Polk, PowerPort, Dynamic Balance, F/X, Atrium, Big Speaker Sound Without The Big Speaker, High Velocity Compression Drive, Acoustic Resonance Control, ARC Port, Casket Basket,
I-Sonic, SurroundBar & SDA are registered trademarks of Britannia Investment Corporation used under license by Polk Audio, Incorporated. Polk Audio Designs & miDock are trademarks of Britannia
Investment Corporation used under license by Polk Audio, Incorporated.