Philips M100 - Manual (Page 7)

5
When prompted, input your Wi-Fi network name and your Wi-Fi
password.
•
If you want to set-up another monitor, repeat the steps of
‘3 – Set-up’.
6
In.Sight App will generate a QR code, and hold approx. 15 cm
(0.5 ft) in front of the monitor lens.
Use the monitor
After set-up, you are ready to use the monitor. Launch the Philips
In.Sight App on your smartphone or tablet.
You can use the monitor when it is connected to your own Wi-Fi network
or any other Wi-Fi network. If there is no Wi-Fi network available, it will
work over 3G. Please note that 3G data charges can occur.
After log-in, you see thumbnail overview of the monitor(s). Tap the
thumbnail for full screen viewing.
M100_05_CCR.indd 7 7/30/2012 11:15:34 AM