Panasonic BM-ET330 - Manual (Page 13)

13
■ Rear View
Remove the cable hole cover by loosening the screws with a Phillips screwdriver.
System Instruction
Cable hole
(Used if you make a hole
on the wall and pass the cables)
Rear tamper detection switch*
Mounting hook hole (x4)
Remove the cable hole cover by loosing the screws
with a Phillips screwdriver.
Cable hole cover (Used if you lay cables along a wall surface)
* Refer to the setup manual (PDF file) supplied
to the administration software.
Cable hole cover
■ Internal View
● Front View
Connection terminal
Front tamper
detection switch
Cable hole
Mounting screw hole
Video cable
(Video surveillance
camera output)
LAN connector
(10 Base-T/100 Base-TX)
Tamper detection buzzer
volume controller*
Video surveillance camera
The lens is fixed. Do not touch.
Setup switches*
Setup cable connector*
* Refer to the setup manual (PDF file) supplied to the administration software.