Power Acoustik MID-65 - Manual (Page 2)

Congratulations and thank you for purchasing Power Acoustik products. We are confident
you will enjoy your new mid-bass driver. It is designed for high output system with maxi-
mum efficiency.
We advise you to keep this manual in a safe and dry place. Write down any important
information to reference from in the future, such as you enclosure information and port
dimensions. Draw a simple diagram or parameters of the enclosure incase you ever need to
reference from it in the future.
Due to the nature of this speaker, it works best when installed in smaller sealed enclosures.
The use of a ported enclosure is not recommended.
Specifications
NOTICE
Enclosure Recommendations for MID-65
Optimum Enclosure
Model
Mounting Depth
Outer Diameter
Cutout Diameter
Driver Displacement
Impedance
RMS Power
MAX Power
PEAK Power
Voice Coil
Magnet Weight
Frequency Response
Resonant Frequency
Qts
Qms
Qes
Vas
XMAX
SPL
MID-65
2.875”
6.625”
5.8”
.02 cu.ft.
8 ohm
100 watts
200 watts
300 watts
1.25”
20 oz
150 - 15KHz
110.994Hz
.640
3.2
.801
6.934
2mm
92.6dB
NET Volume .4 cuft / 11.3 ltrs
Enclosure Q .808
Max Power 125 watts
SPL 91dB
Fill 60% Loose
Wiring Configurations
This mid-bass driver is only available in a single 8 ohm voice coil configuration, there are no
wiring diagrams to explain for other possible impedance levels. However, you can obtain
different impedance levels with multiple speakers connected to one circuit, but because of
the intended application of the speaker the information is not disclosed. If you will be
designing a system which requires more than one driver in one a circuit and need
assistance calculating the impedance, please E-mail [email protected] for
more information or call our offices at 323.722.3333.