PNY P-NSA2-EC-RF - Manual (Page 5)

Aug/07 MN7036400002 5
For Windows® 2000
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(recommended), then click Next.
3. Please insert the provided driver CD into your CD-ROM Drive,
check CD-ROM drives, uncheck the other boxes, click Next,
then click Next again.
4. If the Digital Signature Not Found message appears, click Yes.
Our driver has been thoroughly tested for stability and
compatibility.
5. Click Next, then Finish.
6. Restart Windows to complete the installation.
To Verify Windows® Installation
1. Right click My Computer and click Manage.
2. Select Device Manager.
3. Double click SCSI and RAID Controller, then double click
Silicon Image SiI 3132 SATALink Controller to display driver
properties. A message this device is working properly is