Philips 520H - Manual

1
CONNECT THE DVD RECORDER
Connect the antenna cable from the wall
antenna outlet to the
RF IN terminal on the
back of the DVD recorder.
Use another antenna cable to connect the DVD
recorder’s
RF OUT terminal to the antenna
in terminal at the back of your TV set.
Use AUDIO/VIDEO cables (red/white/yellow)
to connect the DVD recorder’s
AV OUT
termianls to the AV IN terminals at the back of
your TV set.
Connect the power cable from the DVD
recorder’s
AC IN terminal to the power outlet.
QUICK USE GUIDE
DVDR 520H
Press [STANDBY-ON ]
to switch on the DVD
recorder.
3
START INSTALLATION
2
PREPARE THE REMOTE CONTROL
NO PICTURES! Check if Video Input of the TV set is switched to
“AV” and press [CHANNEL ] button to select the right
channel.
NO SOUND! Check if the audio L/R jacks on the recorder are con-
nected to the TV set, stereo system or receiver.
Press the [SYSTEM
MENU] button to adjust
your peference setting of
this DVD recorder.
Press [p] [q] to select
an item in the menu.
Press [u] to access the
selected item’s options.
Press
[OK] to confirm your
selection.
Language menu
appears. OSD lanuage :
select on-screen display
language.
System menu appears.
Video output:
sets video
output
TV Type: sets the TV type
Date: set the system
date using the
numbered buttons.
Time: set the system
time using the
numbered buttons.
When completed, press [SYSTEM MENU] to
exit the menu.
The DVD Recorder is ready for use!
Switch on the TV set and
select the correct video
input.
TV tuner menu
appears.
TV channel search : Go to
“Utilities” and then “start
scan.” Press
[OK] to start
automatic TV channel
scan to search and store
available channels.