Panasonic TH-37PH10UK - Manual (Page 39)

39
1
2
3
5
Press to display the Setup menu.
4
6
Item Effect Adjustments
Weekly
Command
Timer
Sets Weekly Command Timer. (see page 43)
Onscreen
display On Off
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after was pressed.
Off: Hides all the items above from view.
Initial INPUT
Off PC INPUT1 INPUT2 INPUT3
Adjusts the input signal when the unit is turned on.
Notes:
• Only the adjusted signal is displayed. (see page 18).
• Signal can be displayed when the Terminal board is installed.
• This menu is available only when “INPUT lock” is “Off”.
• When a dual input terminal board is attached, A or B is displayed depending on the selected input
signal. (Ex. INPUT1A, INPUT1B)
• Setting of SLOT3 is not available on TH-37PH10UK.
Press to select “OSD Language”.
Press and hold until the Options menu is displayed.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from
Options menu.
Options
Weekly Command Timer
Initial VOL level
1/3
Off
Off
0
0
Maximum VOL level
Off INPUT lock
Off Button lock
Off Remocon User level
Off Advanced PIP
Initial INPUT
Onscreen display On
O f f
Options Adjustments