Primera Technology Business Card Adapter Kit - Manual

SECTION II: RECORDING AND PRINTING
1. It is necessary to record and print the cards in two separate steps
when using Prassi™ PrimoCD Pro. To record, first load the input bin
with 50 blank CD-R Business Cards. Next, create your recording job
as described in the Duplicator User’s Manual. Make sure to disable
the Print option in Prassi’s Recording Job Window.
2. Once your Business Cards have finished recording, reload them in
the input bin. To design your card, use one of the software
templates from the included disc. Prior to printing, you will need to
change the following settings in the Printer Driver:
• Enable the Manual Load option (Figure 4)
•
Set the Center Size to a value of “-215” (Figure 5)
Figure 4: Manual Load Figure 5: Center Size
PN510116-010607
Operator Instructions
Business Card Adapter Kit
For use with Composer™ Optical Disc Duplicator or
Conductor™ Printer Autoloader
Two Carlson Parkway North Mainzer Strasse 131
Plymouth, MN 55447-4446 • U.S.A. D –65187 Wiesbaden • Germany
Phone: 1-800-797-2772 • 763-475-6676 Phone: +49 (0)611 92777-0
FAX: 763-475-6677 FAX: +49 (0)611 92777-50
Web: www.primeratechnology.com Web:
www.primeraeurope.de