Setting a workout time limit, Setting a pause time limit, Reset, resistance ▲, resistance – Precor Commercial EFX EFX546 User Manual
Page 19
page 19
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
SETTING A WORKOUT TIME LIMIT
You can limit how long a user works out by setting a duration between 1 and 240
minutes. The EFX also lets you choose “no limit” which allows the user to select a
course and work out indefinitely. (Note that the user must enter a workout time of
0 using the
numeric keys at the Enter Time prompt before he or she can workout
“indefinitely.”) If the club setting is “no limit” and the user enter “0” at the Enter
Time prompt, then the Time Remaining display does not appear when a user
works out. (An exception to this rule is the Weight Loss Course.)
Note: The Quick Start program is automatically limited to 30 minutes. However, if
a user presses Quick Start at the Precor banner, and the Club program has
limited Workout Time to less than 30 minutes, than that duration takes effect.
Use the
▼▲ keys to select a workout time limit. For example, if you set the work-
out time limit to 20 minutes, the EFX allows users to specify a workout between 1
and 20 minutes. Users would not be allowed to specify a time longer than 20
minutes.
Note: Take into account that the user will get an additional 5-minute cool down
period appended to his or her workout, so adjust the time limit accordingly.
SETTING A PAUSE TIME LIMIT
Setting a Pause time limit is useful because the EFX exits the course and returns to
the Precor banner at a predetermined interval after the user stops pedaling.
Use the
▼▲ keys to set a Pause time limit between 1 and 120 seconds (2 minutes).
VIEWING THE ODOMETER, HOURS OF USE, SOFTWARE
VERSION AND ERROR LOG
The display console keys that you need to press to view the odometer, the
number of hours the EFX has been in use, the software version and any error
codes, are as follows:
Reset, Resistance
▲, Resistance ▼
Important: Remember to begin at the Precor banner. After pressing Reset, the
next key in the sequence must be pressed within 1/2 second.
The field name Odometer appears briefly and then the odometer value (the
cumulative strides that users have travelled) appears.
Press Enter and the number of hours (Hour Meter) that the unit has been in
use appears. The EFX notes the passing of each 10th of an hour, but the nu-
meric value that appears is truncated to the nearest full hour.
Press Enter again and the unit’s three digit Software Version (upper and lower)
appears on the display.