Philips VR423CAT - Manual (Page 28)

AUDIO ANT
IN
OUT VIDEO
L
R
OUT IN CH3 CH4
OUT IN
28 Rear Panel
AUDIO IN Jack(s)
Connect audio cables coming from the AUDIO OUT Jacks of a camcorder, anoth-
er VCR, or an audio source here. Details are on page 37. If you connect other equip-
ment to the AUDIO and VIDEO IN jacks on the back of the VCR, select channel 001
(AV REAR) at the VCR. This allows you to view or hear the materials playing on the
other equipment.
The VR623CAT is shown here. The VR423CAT has only one AUDIO IN jack.
VIDEO IN Jack
Connect a video cable coming from the
VIDEO OUT Jack of a camcorder,
another VCR, or an audio-visual source
(laser disc player, digital video disc play-
er, etc.) here. Details are on page 37.
If you connect other equipment to the
AUDIO and VIDEO IN jacks on the
back of the VCR, select channel 001 (AV
REAR) at the VCR. This allows you to
view or hear the materials playing on
the other equipment.
ANT(enna) IN Jack
Connect your antenna or cable
here. Details are on pages six-10.
CH3/CH4 Switch
Set to channel 3 or 4
to use your TV with
your VCR. Details are
on pages six-nine.
OUT Jack
Use the supplied black RF
coaxial cable to connect
this jack to the ANTEN-
NA IN Jack on your TV,
Cable Box, or Direct
Broadcast System. Details
are on pages six-nine.
VIDEO OUT Jack
Connect a video cable going to the VIDEO
IN Jack of a camcorder, another VCR, or
an audio-visual system (monitor, laser disc
player, video disc player, etc.) here. Details
are on pages 37 and 43.
AC Power Cord
Connect to a standard
AC outlet to supply
power to the VCR.
AUDIO OUT Jack(s)
Connect audio cables going to the AUDIO IN Jacks of a camcorder, another
VCR, or an audio system here. Details are on pages 37 and 43.
The VR623CAT is shown here. The VR423CAT has only one AUDIO OUT jack.