Planar PT1520MU - Manual (Page 23)

19
Touch Screen Driver Installation
Please note: the PT1520MU is Microsoft Windows® HID (Human Interface
Device) compatible. No additional software driver is required for general
operation of the monitor. Simply plug in the USB cable to the monitor and
computer and power up. The computer will automatically recognize and
operate the PT1520MU.
Should you desire enhanced features and calibration for 1% TPE accuracy,
load 3M® MT 7.11 touch screen driver located on the enclosed CD in the
“PT1520MU, LX1200, 2000, XP” link. The enhanced features include drag
and drop, touch activation on lift off, enhanced touch accuracy, etc.
The following Microsoft Windows operating systems are supported by the MT
7.11 touch driver: Microsoft Windows 2000 and XP.
MT 7.11 Driver Installation Process:
1. Be sure that the USB cable is not connected to the PC.
2. Load the CD-Rom.
3. Click on the “PT1520MU, LX1200, 2000, XP” link.
4. Follow the step-by-step instructions.
5. Reconnect the USB cable to the computer prior to use.
6. Please note: if the touch screen isn’t active, simply reboot your
system.
Please read "Readme.txt" located in the unzipped file folder for
additional information and assistance.