PYLE Audio PICL34 - Manual (Page 4)

SNOOZE FUNCTION
1.
Whenever the alarm activates, it can be temporarily suspended for a short period of 10
minutes by pressing the SNOOZE/SLEEP button.
2. The alarm will then automatically activate again after the 10 minutes SNOOZE period has
ended.
3. This procedure can be repeated for up to approximately one hour.
RADIO OPERATION
1.
Press the POWER/AL OFF button to turn on the unit.
2. Press the FUNC/CL.ADJ. button to select the FM Radio mode.
3. Press and hold the  /TUNE+ or  /TUNE- for approx. 1 second, it will start to search the
next radio station in the direction of the search. The search operation simply finds stations
with strong signals. Stations with weak signal can only be tuned in manually.
4. Press VOLUME+ or VOLUME- button to adjust the volume to the desired listening level.
SAVING RADIO STATIONS IN THE MEMORY
Note : If you use this unit in the first time, or after plug off the AC/DC adaptor from a wall outlet,
the unit memory number will be starting from P01.
1.
Tune to the desired stations.
2. Press and hold the PLAY/PAUSE/MEMORY button, the display will show the next memory
station number and flashing.
3. Press the  /TUNE+ or  /TUNE- button to select memory number, then press
PLAY/PAUSE/MEMORY button again to store the station into the memory.
4. Repeat step 1 to 3 to store more radio stations in the memory.
5. Up to maximum 20 radio stations can be stored in the memory.
TO SELECT A STORED RADIO STATION IN THE MEMORY
In RADIO mode, use the AL1 or AL2 button to select the stored radio station.
Press the AL1 button will go to the next stored radio station.
Press the AL2 button will go to the last stored radio station.
LISTEN TO iPOD/iPHONE WITH DOCKING CONNECTOR
Warning : Turn off your iPhone/iPod before docking on the unit
1.
Press the POWER/AL OFF button to turn on the unit.
2. Press the FUNC/CL.ADJ. button to select the iPhone/iPod mode.
3. Connect the iPhone or iPod to the docking connector, the iPhone or iPod will start playing.
4. Press the VOLUME+ or VOLUME- button to your desired listening level.
5. During playing or in pause mode, press the  /TUNE+ button to go to the next track.
6. During playing, press the  /TUNE- button once to go back to the beginning of the track.
Press the  /TUNE- button twice to go back to the previous track.
7. In pause mode, press the  /TUNE- button once to go back to the previous track.
8. During playing, press the PLAY/PAUSE/MEMORY button to temporarily pause playing. To
resume, press the PLAY/PAUSE/MEMORY button again.
Warning : Please make sure that your iPhone or iPod is properly docked into the unit. Failure to
do so may damage your iPhone/iPod.
- 6 -
Charging your iPod
While your iPhone or iPod is docked in the unit and the unit is connected to AC power, your iPhone or
iPod will recharge until your iPhone or iPod is fully charged.
AUX-IN CONNECTION
1.
Press the POWER/AL OFF button to turn on the unit.
2. Press the FUNC/CL.ADJ. button to select the Aux mode.
3. Insert one side of the audio cable into the Line-Out or Phone Jack on your MP3 Player or audio
device and the other side into the AUX-IN jack of the unit.
4. Turn on your MP3 player or audio device and follow its playback instructions.
SLEEP TO MUSIC FUNCTION
1.
This function allows you to listen to the radio, iPhone/iPod or any audio device that connected to the
aux-in jack of the unit while you fall asleep.
2. Press the SNOOZE/SLEEP button, the display will show the default sleep time of 90 minutes. Press
the SNOOZE/SLEEP button again to select the sleep time with decrement of 10 minutes.
3. When the correct sleep time is selected, stop pressing the SNOOZE/SLEEP button, the unit will go
to the sleep mode in about 5 seconds with the SLEEP icon appear in the display.
4. Now you can enjoy listening to the selected music for the pre-set period of sleep time.
5. After this pre-set time has elapsed, the unit will switch off automatically.
Note : If you choose Aux-in for the Sleep Function, when the pre-set time has elapsed, only the unit will
turn off, the audio device that connected to the aux-in jack is still in working.
CHANGING DISPLAY COLOR
Press the COLOR button to turn on the color display changing. The display color will change from one
color to another color every few seconds. Press the COLOR button again set the display to only one
color.
SPECIFICATIONS
Frequency Range:
FM 88 – 108 MHz
Power Supply: AC 100V to 240V ~ 50/60Hz
DC Adaptor : 7.5V – 1.8A
Specifications are subject to change without further notice.
- 7 -