Pioneer S-DV8 - Manual (Page 16)

Connecting up 02
16
En
Listening to TV audio through this
system
You can connect the audio output of your TV to
this system so that broadcast TV sound is
played through this system.
• Connect a stereo audio cable (not
supplied) from the audio outputs of your
TV to the TV IN jacks on this system.
• If you find that the TV audio is distorting
when played through this system, you can
set the input attenuator to reduce the input
signal level. See
Optional system settings
on page 67 to do this.
Using this unit with a Pioneer
plasma display
If you have a Pioneer plasma display (models
PDP-504HDG and PDP-434HDG), you can use
an SR+ cable (see note below) to connect it to
this unit and take advantage of various
convenient features, such as automatic video
input switching of the plasma display when the
input is changed.
• Use a 3-ringed miniplug SR+ cable to
connect the CONTROL IN jack of this unit
through a media receiver to the CONTROL
OUT jack of your plasma display.
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ control options for Pioneer plasma displays
on page 59 for detailed instructions.
AUDIO
ANTENNA
AM LOOP
ANTENNA
FM
UNBAL
75
LINE 1
LINE 2
TV
OUT IN IN
L
R
L
R
COAXIAL IN
TV
AUDIO
OUTPUT
VIDEO
CONTROL
P R
P B Y
COMPONENT
VIDEO OUT S-VIDEO
OUT
VIDEO
OUT
SPEAKERS
OUT
CONTROL
Pioneer plasma display
Media receiver
IN
02_Connecting_Up.fm 16 ページ ２００３年１２月２７日 土曜日 午後１時１９分