PYLE Audio PLFMTR9BT - Manual (Page 2)

Installation
1. Insert the PLFMTR9BT into the socket of car lighter.
2. Adjust the transmitting frequency of the PLFMTR9BT to correspond channel between
FM88.1~107.9MHz
3. Set the car fm channel the same with PLFMTR9BT channel, then the PLFMTR9BT could
play music of U-disk or SD/MMC, or other audio source through line-in.
Bluetooth function operations
Paring with a Bluetooth enabled cell phone
1. With the PLFMTR9BT ON, long press the PLAY key on the panel or on the remote
control, the screen will display “Pairing”, indicating that the unit is ready to be
paired.
2. The Bluetooth cell phone will search for the nearby Bluetooth devices, the cell phone
will display “PLFMTR9BTBT” in the list of Bluetooth devices, if you are using a
“dongle” type Bluetooth adaptor; follow the manufacturer’s instructions for that
device.
3. Select “PLFMTR9BTBT” to add this Bluetooth device into the list of paired devices.
4. Enter in the PIN Code “0000” and your mobile phone will show that pairing is
completed.
５.If pairing is successful, the screen of PLFMTR9BT will display “Pair OK”, and the
Bluetooth icon will be shown on the screen.
Operations on the Panel
PLAY BUTTON
Pairing – Press and hold for 3seconds, “Pairing” display on the screen.
Answer a Call – Press once to answer a call under speaking mode.
Playing – Play the music under the playing mode.
Stop – Stop playing the music under the playing mode.