Function menus – Planar VSS17SX User Manual
Page 22

17" VitalScreen S
14
QUICK LINKS
GETTING STARTED
INSTALLING THE DISPLAY
USING THE CONTROLS
APPENDIXES
Function Menus
Monitor–Control Menu
Monitor-Control. Allows you to adjust the display characteristics.
Adjust these settings when Auto Adjust results are unsatisfactory.
Pressing Adjust PLUS or MINUS displays the Monitor-Control submenu.
Use the Function LEFT or RIGHT button to select a submenu item.
Auto-Adjust. Select Auto-Adjust to set the display parameters to
optimum values.
H-Position. Press Adjust PLUS or MINUS to move the display image
left or right on a horizontal plane.
V-Position. Press Adjust PLUS or MINUS to move the display image
up or down on a vertical plane.
Phase. Press Adjust PLUS or MINUS to fine-tune the display image.
Clock. Press Adjust PLUS or MINUS to adjust the display pixel
number alignment.
Reset. Press Adjust PLUS or MINUS to reset all the Monitor-Control
submenu settings.
Graph/Text. Press Function Enter to switch between the text and
graphic options.
Port-Select. Switch between analog and digital mode; if no signal
comes the Auto-Detection function is activated.
Exit. Press Adjust PLUS or MINUS to exit the submenu.