Philips 150P2M - Manual (Page 7)

VIDEO
• Video dot rate 80 MHz
• Input impedance
- Video 75 ohm
- Sync 2K Ohm
• Input signal levels 700m Vpp
• Sync input signal
Separate sync
Composite sync
Sync on Green
• Sync polarities Positive and negative
• Input Frequency
XGA Hsync 48- 61 KHz, Vsync 60 - 76 Hz (N.I.)
SVGA Hsync 35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync 31- 38 KHz, Vsync 60 - 76 Hz (N.I.)
• Video interface
Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are
available. It can be switching via OSD selection.
AUDIO
• Input signal level 0.7 Vpp
• Headphone out signal level 32 Ohm 20+20mW
• Input signal connector 3.5mm mini jack
• Loudspeaker 2+2W stereo front firing (PMPO: 48W)
MICROPHONE
• Sensitivity -55dB re 1V/ubar at 1KHz
• Output impedance 2.2K Ohm max.
• Directivity -5dB at 180°
• Frequency range 300Hz-3KHz
OPTICAL CHARACTERISTICS
• Contrast ratio 300 (typ.)
• Brightness 250 cd/m 2 (typ.)
• Peak contrast angle 6 o'clock
• White Chromacity x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)
150P2M Product Information
file:///D|/Grace/150P2/english/150p2m/product/product.htm (2 of 8) [6/19/2001 3:28:33 PM]