Storage – Poulan ES300 User Manual
Page 14
14
Inside view of
Bar Clamp
Adjusting
screw
Adjusting pin
Adjusting pin hole
S
Secure the guide bar and bar clamp
plate with the bar nuts; tighten finger
tight only.
CAUTION: If saw chain is installed back-
wards, the saw will vibrate excessively
and will not cut wood.
CHAIN ADJUSTMENT
See
CHECK CHAIN TENSION
in the
MAIN-
TENANCE
section.
CUSTOMER SERVICEABLE PARTS
WARNING:
Use of any other ac-
cessory or attachment might present a
risk of injury to the operator.
REPLACEMENT PART
PART NO.
Hex Nuts
530015917
Oil Cap
530053072
Bar Adjusting Screw
530016265
Bar Adjusting Pin
530053068
File (5/32” dia.) Twin Pak
952055085
Xtra GUARD
r
Chain --14”
952051469
Xtra GUARD
r
Chain --16”
952051470
Lo--Kick
r
Guide Bar -- 14”
952044758
Lo--Kick
r
Guide Bar -- 16”
952044759
Bar & Chain Lubricant --1 qt 952030203
Bar & Chain Lubricant --1 gal 952030204
STORAGE
WARNING:
Perform the following
steps after each use:
S
Allow motor to cool before storing or
transporting.
S
Store chain saw and extension cord in
a well ventilated area
S
Store chain saw with all guards in
place and position chain saw so that
any sharp object cannot accidentally
cause injury.
S
Store chain saw unplugged, well out of
the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the end of
the season or if it will not be used for 30
days or more.
If your chain saw is to be stored for a
period of time:
S
Clean it thoroughly before lengthy
storage.
S
Store in a clean dry area.
S
Lightly oil external metal surfaces and
guide bar.
S
Oil the chain and wrap it in heavy
paper or cloth.