Philips 15PF5120/58 User Manual

Page 19

Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to EXT1,
and the equipment which produces the S-VHS signals (S-VHS and
Hi-8 video recorders, certain DVD drives) to EXT2 and all other
equipment to either EXT1 or EXT2.
To select connected equipment
Press the

key to select

EXT1

EXT2

S-VHS2

(S-VHS signals

from the EXT2 socket).

Make the connections as shown opposite.
With the

key, select

AV/S-VHS3

For a mono set, connect the sound signal to the AUDIO L (or AUDIO R)
input.The sound automatically comes out of the left and right speakers
of the set.

Headphones
When headphones are connected, the sound on the TV set will be
cut.The

VOLUME -/+

keys are used to adjust the volume level.

The headphone impedance must be between 32 and 600 Ohms.

Make the connections as shown opposite.
With the

key, select

For more information on using HD mode see page 11.

Other equipment

Side connections

HD equipment

Computer

PC with DVI
Connect the monitor output (DVI) of your computer to the
DVI-I In of the LCD TV. Connect the sound output Audio out of
the computer to the input DVI Audio in of the LCD TV.

PC with VGA
Connect the monitor output (VGA) of your computer via a
VGA/DVI adaptor to the DVI In of the TV. Connect the sound
output Audio out of the computer to the input DVI Audio in of
the LCD TV.
For more information on using PC mode see page 10.

Configure the computer on 1024 x 768, 60 Hz for
optimum resolution.
Here is the list of the different display resolutions available on
your TV:
640 x 480, 60 Hz

800 x 600, 56 Hz

1024 x 768, 60 Hz

640 x 480, 67 Hz

800 x 600, 60 Hz

1024 x 768, 70 Hz

640 x 480, 72 Hz

800 x 600, 72 Hz

1024 x 768, 75 Hz

640 x 480, 75 Hz

800 x 600, 75 Hz

720 x 400, 70 Hz

832 x 624, 75 Hz