Philips SOUNDMACHINE AZ302 - Manual (Page 8)

Selecting a different track
• Press ∞ / § once or repeatedly until the
desired track number appears in the display.
For MP3-CD: First press 34 once or more
to find your album.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold
∞
or § .
The CD is played at high speed and with reduced Ü
volume.
2 When you recognize the passage you want,
release ∞ or § to resume normal playback.
Helpful hints:
– When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to
activate programming.
Display: Ü PROG and 00 flash. (See 5)
2 Press ∞ or § to select your desired track
number.
3 Press PROG to store the desired track
number.
Display: Ü PROG and 00 flash for you to
program the next track.
4 Repeat steps 2 to 3 to select and store all
desired tracks in this way.
If you attempt to store more than 20 tracks, no Ü
track can be selected and the display
shows ---.
5 To play your program, press 2/;.
Helpful hints :
– When playback of your program comes
to the stop position, your set will
return to normal playback. To re-enter
program mode, press PrOg in the stop
position.
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
Erasing a program
You can erase the contents of the memory by:
– in the stop position, press PROG to
enter program mode, and then press 9.
– selecting FM, MW or OFF;
– opening the CD door;
Different play modes:
REPEAT. and SHUFFLE
(See 6
, 7
)
You can play the current track or the whole
disc repeatedly, and combine REPEAT
modes with PROG (PROGRAM).
– plays the current track continuously.
– repeats the entire CD/program.
For MP3:
ALB – plays all tracks of current album
repeatedly.
– plays all tracks in random order.
1 To select play mode, press MODE once or
more.
The display shows the related icon. Ü
2 Press 2; to start playback if in the stop/
pause position.
3 To return to normal playback, press MODE
repeatedly until the modes are no longer
displayed.
– You can also press 9 to cancel your play mode.
MP3-CD/CD Player