PYLE Audio PLCD21 - Manual (Page 7)

SWITCHING ON/OFF THE UNIT
SOUND ADJUSTMENT
Switch on the unit by pressing any button
(except
button (1) and button (4))
or inserting a disc to disc slot (18).
When system is on, press
button (2) to
turn off the unit.
Press button (10) to
adjust volume level.
Press button 9 continually will
changing in the following order:
REL
VOL VOL
SEL
-
- ( )
+/ -
Press button (10) to
returns to original status after 5 seconds.
Press and hold button (15) until the
clock blinking, you can press
button (10) to adjust hour, and
button (10) to adjust minute.
VOL VOL
2. Adjusting time:
DISP
VOL
VOL
+/ -
+
-
adjust
the desired sound quality.
Press button (9) for several
seconds to enter into the mode,
Press it continually, it is activated as
cyclical mode of following functions for
user's selection.
BEEP →P-VOL
Select the desired item by press
button (10) .
Press (8) for several seconds
to reinforce the bass output. Press it for
several seconds again to release this
function.
Press button (15) to show current
information and time on the LCD, and it
-
SEL
MENU
VOL
VOL
BND/LOU
1. Displaying time:
DISP
ON/OFF
+
/ -
LOUDNESS FUNCTION
DISPLAYING/ADJUSTING TIME
→CLK
→ PRI→ HOUR
ON/OFF
FREQ/CLK/NO 12/24
MUTE FUNCTION
Press
button (3) to mute down the
sound instantly, press it again to recover
previous volume level.
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
MUTE
LCD DISPLAY (19)
FLASHING LED (21)
RESET FUNCTION
Exhibit current frequency and activated
functions on the
display (19).
The led display will flash if the front panel
is not inserted into the main unit.
button (20) must be activated
with either a ballpoint pen or thin metal
object. The
button is to be
activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press
button, the unit
LCD
RESET
RESET
RESET
6
SWITCHING TO RADIO MODE
SELECTING THE FREQUENCY BAND
STEREO/MONO
Press button (13) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
Press button (8) to select the
desired band.
The reception band will change between
FM and AM
Press button (16) to select mono or
stereo mode.
MODE
BND
MON
.
Radio Operation