Panasonic KX-TG1034 - Manual (Page 35)

Multi-unit Operation
For assistance, please visit http://www.panasonic.com/help 35
Answering transferred calls
Press {C} to answer the page.
L
After the paging party disconnects,
you can talk to the outside caller.
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{
MENU}
2
{V} /{^}: “Handset settings” i
{ OK}
3
{V} /{^}: “Registration” i {OK}
4
{V}
/{^}: “HS registration” i
{ OK}
5 Base unit:
Press and hold {LOCATOR} until
the registration tone sounds.
L
If all registered handsets start
ringing, press {LOCATOR} to
stop, then repeat this step.
L After the base unit beeps, the rest
of the procedure must be
completed within 1 minute and 30
seconds.
6 Handset:
Press {OK}, then wait until a beep
sounds and w stops flashing.
Registering an additional handset
See page 3 for information on the
available model.
Start from step 5.
Deregistering a handset
1
{ MENU}
2
{V} /{^}: “Handset settings” i
{ OK}
3
{V} /{^}: “Registration” i {OK}
4
{V} /{^}: “Deregistration” i
{ OK}
5
{
3}{3}{5} i {OK}
6 Select the handset(s) you want to
cancel by pressing the desired
handset number ({1} – {6}). i
{
OK}
L The selected handset number(s)
flashes.
L To cancel a selected handset
number, press the number again.
The number stops flashing.
7
{V} /{^}: “Yes“ i {OK}
8 After “Deregistered“ is displayed,
press {OFF}.