ProForm PFTL99806.3 - Manual (Page 9)

9
4. With the help of a second person, hold the con-
sole assembly near the Uprights (73, 74).
Connect the Upright Wire Harness (75) to the
Console Wire Harness (71).
See the inset draw-
ing. The connectors should slide together
easily and snap into place. If they do not, turn
one connector and try again.
IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON.
71
Console
Assembly
4
75
74
5. Connect the TV Cable (49) and the AV Wire (97)
to the cables extending from the console assem-
bly. Then, insert the connectors down into the
Uprights (73, 74).
Next, insert the brackets on the Handrails (99)
into the Uprights (73, 74).
Make sure that no
wires are pinched.
49
73
97
5
74
99
6. Partially tighten three Handrail Bolts (64) with
three Upright Star Washers (90) into the Right
Upright (74). Next, partially tighten three
Handrail Bolts with three Upright Star Washers
(not shown) into the Left Upright (73). Then,
firmly tighten the six Handrail Bolts.
73
74
64
64
90
90
75
6
73
99
71