Multi-unit operation, Intercom – Panasonic KX-TG5771 User Manual
Page 63

Multi-unit Operation
For assistance, please visit http://www.panasonic.com/help
63
Intercom
Intercom calls can be made:
– between the handset and base unit
– between handsets
Note:
L
If you receive an outside call while
talking on the intercom, you hear 2
tones. To answer the call with the
handset, press {OFF}, then press {C}.
To answer the call with the base unit,
press {SP-PHONE} 2 times.
L
You can locate a misplaced handset by
paging it (handset locator).
Making an intercom call
1
{
INTERCOM}
2
Select the desired unit. i {CALL}
L
The destination unit beeps for 1
minute.
L
To stop paging, press {OFF}.
3
When you finish talking, press {OFF}.
Note:
L
If a USB adaptor (KX-TGA575) is
registered to the base unit, its extension
number is not displayed on the handset.
L
If a cordless camera (KX-TGA573) is
registered to the base unit, its extension
number is not displayed on the
monochrome display models (KX-
TG5771/KX-TGA570).
1
{
INTERCOM}
2
To page a specified handset, enter its
extension number ({1} – {8}).
To page all handsets, press {0}.
L
The destination unit(s) beeps for 1
minute.
L
To stop paging, press {INTERCOM}.
3
When you finish talking, press {SP-
PHONE}.
Answering an intercom call
1
Press {C} or {s} to answer the page.
2
When you finish talking, press {OFF}.
1
Press {SP-PHONE} or {INTERCOM}
to answer the page.
2
When you finish talking, press {SP-
PHONE}.
Note for handset and base unit:
L
When the ringer volume is set to off, the
handset or the base unit rings at the low
level for intercom calls.
Handset
Base unit
Handset
Base unit
TG5771_5776_5777.book Page 63 Friday, February 23, 2007 3:52 PM