Panasonic KX-TDA50 - Manual (Page 35)

Setting the Handset and Base Unit
35
*
1
After you set the PBX type, unplug the AC adaptor, wait until the run indicator of the base unit
turns off, and plug in the AC adaptor again.
*
2
To check the type of PBX you are using, see page 31.
*
3
When a check mark is displayed beside a tone type, the incoming call log for that tone type
will be logged.
• These settings are only applied to your telephone, not the PBX itself.
Main Item Description Setting Default
Selects the type of PBX that
the base unit is connected to.*
1
Type 1*
2
Type 2
Type 1
When using a KX-TAW848/KX-
TDA series PBX, and the PT
LED patterns for FWD and
DND have been set reversely
on the PBX, you need to set
Mode 2. (See
page 7.)
Mode 1
Mode 2
Mode 1
“PBX Type-Type 1
(KX-TAW/TDA series)”
only
For Private Ring, select the
displayed phone number or
name line. It is recommended
to select the phone number
line. Displayed items vary
depending on your PBX and its
settings. 1st Line
2nd Line
3rd Line
1st Line
“PBX Type-Type 2
(KX-TA308/TD
series)” only
Sets the current date and time
to be shown on the display in
the Incoming Call Log. Date
Time
01-01-05 (D-M-Y)
12:00 AM (H:M)
“PBX Type-Type 2
(KX-TA308/TD
series)” only
Sets each type of Incoming
Call Log to either on or off.*
3
You must set at least one of the
incoming call types to on to
store a received call in the
Incoming Call Log.
Single Tone
On
Off
Double Tone
On
Off
Triple Tone
On
Off
Single Tone: Off
Double Tone: Off
Triple Tone: Off
PBX Type
Fwd/DND Icon
Caller ID Line
T.Edison
01234567890
LN-001:
1st Line
2nd Line
3rd Line
Date&Time
Incoming Log