Parasound Zamp v.2 - Manual (Page 11)

11
Voltage Selection Switch for the Zamp v.2
The Zamp v.2 can be easily converted for 110-120 Vac or 220-240 V operation by using the
voltage selector switch located on the bottom of the unit.
For 110-120 Vac operation. Slide the switch into the position until the section of switch
labeled "115" appears through the opening in the chassis.
For 220-240 Vac operation. Slide the switch into the position until the section of switch
labeled "230" appears through the opening in the chassis.
115
230