Palsonic PMSL-329 - Manual (Page 6)

horizontally on a flat, steady base so that air can circulate around it for ventilation.
away from humidity and heat, magnetic fields, such as those from loudspeakers etc.,
and with no heavy objects placed on top.
Place your sound system
The machine
CONTROLS
6
To system power ON (stand-by)
Power save mode (Only Europe) : This mode
implemented to reduce power consumption at stand-by
operation. At this time, all display are turn off except
stand-by mode (power save) L.E.D. This mode is
activated by power button after clock setting. Clock,
Power, Function, Disc direct, OPEN/CLOSE,
Disc change buttons are available at this mode.
To select tape 1/2 tuner and band, a
connected device (video ...), CD player or to
show the current time in the system's
display
For a short pause during recording on a tape or to advance in a
programming (e.g. clock set).
To stop play and record or to cancel values
and functions.
To tune in stations, to set values in
programming, to fast reverse or advance
tape, CD.
To start play or to select station presets and reverse play for tape.
PHONE Headphone socket. Plugging in a
headphone switches the speakers off.
To set the minutes after which the system
is to switch off automatically. Press
repeatedly for a time between 90 and 10
minutes.
If you want to turn the volume down very
quickly, because the phone rings or
someone is knocking at the door, press this
button.
CD1 CD2 CD3
To open or close the disc compartment. To
load / unload CDs.
To play the next disc and to turn disc tray
for loading up to 3 discs. Also to load a disc
while another is playing.
Direct access to one of the three discs that
you can load into your sound system.
Remote Control buttons see page 4.
OPEN/
CLOSE
DISC
CHANGE
SET CLEAR TUNE DOWN TUNE UP