Palsonic 7118 User Manual

Page 11

When you want to store and memorise another
channel with another position, repeat steps 3.3, 3,4.

4. Skip unwanted program numbers
After presetting the channels, you can skip unwanted
program numbers to select your desired channels.

Repeat steps 3.1 to 3.3 to select the unwanted program
position of the unwanted channels .

Press the or button to select SKIP. Press the
of button to select SKIP ON.
After completion of the channel presetting, when you
press the CH button to select channel, the
unwanted channels will be skipped.

If you want to skip other unwanted channels, repeat
step 4.1 above to change the channel numbers.

If you want to restore the skipped program numbers,
do step 4. 1 to select these program numbers, then
press the or button to select SKIP OFF.

5. Manual Fine Tuning

When sound and picture's effect of a channel is poor
(for example : one or two CATV channel's sound and
picture are not standard) , you can correct by the use of
Manual Fine Tuning.

Repeat steps 3. 1 to 3.3 to select the channels you
want to manually fine tune.

Push the or button to select MFT, then press
or button, the channel begins to search until
the optimum picture and sound is achieved.

If some channel's colour or sound is abnormal, it
may be that the setting of the colour or the sound
system is wrong, please do the following step 6 to
set the colour and sound system.
After finishing the preset operation, press the
MENU button repeatedly until the "on - screen"
display disappears and exits from the main menu.

MANUAL SEARCH

Press the button to

select SKIP

Press the or button
select SKIP

SKIP OFF

SKIP ON

POSITION 10

POSITION 14

Press the button to

select MFT

MFT

Press the button it
begins fine tuning in
direction.

Press the MENU button
repeatedly until on-screen
display menu disappears

3.5

4.1

llllllllllllll

- - - - -

4.2

5.1

5.2

Note:

MFT