Sony KV-29CL10K - Manual (Page 19)

19
GB
Using Optional Equipment
1
Connect your equipment to the designated TV socket, as indicated in the previous page.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the button repeatedly until the
correct input symbol appears on the screen.
Symbol Input Signals
1 • Audio / video input signal through the Scart connector C.
• RGB input signal through the Scart connector C. This symbol appears only
if a RGB source has been connected.
2 • Audio / video input signal through the Scart connector D.
2 • S Video input signal through the Scart connector D.
3 • Video input signal through the phono socket A and Audio input signal
through B.
4
Press button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select
3 input
signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this
manual and select “Dual Sound” “A” on the sound menu screen (see page 11).
S
Additional Information
01GBKV29CL10K.fm Page 19 Tuesday, March 11, 2003 5:50 PM