Porter-Cable 8529 - Manual (Page 9)

9
VACUUM HOSE
A standard 1" vacuum hose can be
attached to the dust port to connect
the tool to a vacuum cleaner or dust
collection system (Fig.1).
TEMPLET GUIDES
The templet guide insert is included
with the router for use with optional
templet guides. A wide variety of
templet guides is available from your Porter-Cable/Delta supplier for use in
pattern and templet routing operations.
DISCONNECT TOOL FROM POWER SOURCE.
1. Remove he clear dust cover (A) Fig. 2., and the three clear dust cover
retaining screws (B) (slotted screw-driver or T20 torque wrench).
2. With the motor at its highest position, move the plunge locking lever (B)
Fig. 8 to the free motion position by rotating it to the left (in the operating
position) as far as it will go. The lever will lock into position.
Fig. 1
FUNCTIONAL DESCRIPTION
ASSEMBLY
CARTON CONTENTS
* Router
* Offset wrench
* Template guide adapter * 1 /
2
” and 1 /
4
” collets
* 10-24 x 1 /
4
” screws
FOREWORD
MODEL 8529’s versatility - speed range of 10,000 to 23,000 RPM, collet sizes
of
1 /
4
" and 1 /
2
", dual plunge adjustments, and bit size up to 3 1 /
2
" diameter -
allows it to handle the most demanding routing application. A 3 /
8
" collet is
available as an accessory.
OPERATION
NOTE: This tool is shipped completely assembled. No assembly time or
tools are required.