Pacific Cycle BRIGHT LIGHT ENERGY HF3305 User Manual

Page 20

Text mode
Original mode

Seat and Handlebar Mounting Reflectors

First attach the reflector to the reflector bracket with the reflector screw, see the top
diagram. Next, remove the clamp screw and open the clamping reflector bracket.
Place clamping reflector bracket around the handlebar or seatpost. If the clamp
is too loose, insert the shim inside of the clamp. Tighten the clamp screw to hold
reflector assembly in place, see the second diagram. Finally, adjust the reflector
assembly in place and ensure that it is upright and facing away from the bike.

Seatstay Mount Reflector Bracket Assembly

First insert one washer onto the hex bolt and insert hex bolt through the reflector
bracket and then through the seatstay bridge. Next, insert a second washer onto the
bolt and thread a hex nut onto the bolt behind the seatstay bridge. Tighten bolts until
snug, making sure the reflector is in an upright position. See diagram at the right.