Panasonic BB-HNP11CE - Manual (Page 18)

Operating Instructions
18
1.5.1 Modifying or Deleting This Software
To modify or delete this software, follow the steps below.
1. Insert the CD-ROM to the CD-ROM drive.
• Installation Selection window automatically appears.
• If Installation Selection window does not appear, double-click "setup.exe"
file on the CD-ROM.
2.
Click [Install Network Camera].
• If this software have been installed, the following window is displayed.
3. Check [Repair Network Camera Recorder] or [Remove Network Camera
Recorder], and click [Finish].
• If the modification or deletion is complete, the confirmation window is
displayed.
Note
If you delete this software, the camera settings and recorded images are
not deleted. To delete them, manually delete NCR2 folder at the
destination.