PYLE Audio PSWLE08 - Manual (Page 2)

2
-3- -2-
Hardware Kit: Hardware Kit:
Wood stud
TV connection block Wall plate
Part 1a-Wood Stud Mounting
.
Use wall plate as a template, make sure it is level, and mark three mounting holes
along the center lines of the wood studs. Drill three 3/16
)
) . .
” ” (5mm)dia holes 2 (50mm)
deep. Level wall plate and attach to wall with three long bolts(1 and three washers
(2 by box wrench(4). Tighten screws firmly Do not overtighten
Part 1a-Wood Stud Mounting
812mm(32
) "
Φ3/16 (5mm) ”
2 50mm) ” (
812mm(32
) "
2 (50mm) ”
Φ3/8 (10mm) ”
2
1
Part 1b-Concrete wall mounting
.
Level wall plate and use wall as a template to mark three holes. Drill three 3/10 (8mm)
dia. holes 2 (50mm) deep. Insert three anchors(3) into holes and secure wall plate
with three long bolts(1) and three washers(2) by box wrench(4).Tighten screws
firmly. Do not overtighten ”
”
Part 1b-Concrete wall mounting
1
3
Supportable block
Supportable lever
Bubble level
M6× mm 15 bolt
M6×16mm bolt
M8 mm ×16 bolt
M8× mm 20 bolt
2
2
2 F
G
H
I
A
B
C
2
2
D
2
2
2
E
ID Description Qty
M5 taper washer
M5 washer 2
J 2
M5 mm ×15 bolt
M5× mm 16 bolt
M4× mm 15 bolt
M4×16mm bolt
1
2
3
3
3
4
3
1
Long bolt
Wall anchor
Long bolt washer
Box wrench
2 1 3 4 A,C,E,G I J B,D,F,H
4
4
Part 2-Attaching To Screen Supportable block and TV connection block
First, select the small(A,B), medium(C,D,E,F) or large(G,H) screws. To attach
supportable block by using selected screws(A,C,E,G) and washers(I), and then
attach TV connection block to screen by using selected screws(B,D,F,H) and washers
(J). Tighten screws firmly but do not overtighten. WARING screws(A,B,C,D)need
washer, screws(E,F,G,H) don’t need washer.
Part 2-Attaching To Screen Supportable block and TV connection block
E,G
F,H
I
A,C
B,D J
I
J