Philips LED Luminaires - Manual (Page 7)

10 11
LED LUMINAIRES CITY BEA
UTIFIC
A TION
LED LUMINAIRES CITY BEA
UTIFIC
A TION
Product dimensions
Measurements in mm
The Philips LedString system is formed by L E D
modules, connected by wires and designed to be
directly mounted onto a sign back-plate or other
substrate. The driver is a single device which
converts the main voltage to a low voltage D C
required to operate LedString.
Features
• Available in 21mm reels of L E D s, with a slim
driver: both fully weather proof
• Each driver has a minimum connection of 5 L E D s
(Red and Amber) or 7 L E D s (Blue and Green).
Maximum connection is 45 L E D s or
49 L E D s respectively
• Standard range: Red, Amber, Blue, Green and White
• Safety compliance: E N 60598
LedString
LedMaster 800
Controller
The LedMaster 800 is a compact and powerful
controller in the Philips L E D range of color
changing luminaires. LedMaster 800 possesses
tremendous controlling power to command up to
720 units of the L E D color changing luminaires.
Product dimensions
Features
• Optimizes power supply for R, G, B diodes of
the L E D luminaires thereby providing constant
power for dynamic color changing ranges of
each color
• An embedded data repeater allows L E D
luminaires to be installed over long distances.
This is especially beneficial to motion-picture-
like programming
• With 7 power output ports, the system can
support up to 7 circuits of L E D luminaires with
a maximum power limit of 100W x 3
Measurements in mm
Power Supply
The LedMaster 800 Power Supply is an integrated
device panel and serves as a power source for
the Philips L E D range of color changing luminaires.
It also serves as the data repeater hub of
its controller.
LED module
Connector
Driver
Pitch=7mm
Controller Power Supply
101
194
182
101 CONSOLE
Program Selection
0.T 1.T 2.T 3.T 4.T
TEST FAIL ACTIVE POWER
OFF
ON POWER 96
286
62
62 264
285
• Ingress protection: I P 66 (E N 60598, E N 60529)
• Approval marks: E N E C , C E , c C S A us.
• Quality standard: I S O 9001-2000
• Environmental standard: I S O 4001
Benefits
• Reliable and flexible
• Low cost of ownership
• Long life
• Safe to use: no high voltages or toxic materials
• Easy to install
• No breakage during shipping and handling
Main applications
• Outdoor signage
• Decorative lighting
Features
• Extremely diverse color changing effects – up to
32 sequencing effects in descriptive language with
minimum memory storage
• Connects up to 8 sub-controllers for a maximum
of 720 units of true-color L E D luminaires
• Built-in 64K non-volatile memory to store up to
32 sets of programs
• Equipped with 5 sets of D I P switches that allows
manual settings of 32 pre-set programs
• R S -232 port – serves as an interface between
LedMaster 800 and P C software; or as a gateway
to other control systems
Main applications
• Façade
• Landscapes