beautypg.com

Peavey CS 1200X User Manual

Page 3

background image

WARNING!

For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS, OR A
COMBINATION OF SPEAKERS THAT TOGETHER ARE LESS THAN 2 OHMS!

Using one speaker, it must be rated at 2 ohms minimum.

Using two speakers, they must be rated each at 4 ohms minimum.

Using three speakers, they must be rated each at 8 ohms minimum.

The world-famous

1200 power amplifier has been changed to the new, extended-perfor-

mance

This upgraded model provides impressive

output power capability

while still maintaining the current and

ratings, and meets rigid industry standards for

power bandwidth, slew rate, and distortion specifications.

The new extended specs are:

630 W RMS into 4 ohms 900 W RMS into 2 ohms (per channel)

1260 W RMS into 8 ohms 1800 W RMS into 4 ohms (bridged)

compression with LED indicators and defeat switch

Slew Rate: 40 V/microsecond, stereo mode, each channel
Power Bandwidth: 10 Hz to 50

4 ohms, rated power

Total Harmonic Distortion: less than

rated power

Hum and Noise: 100

below rated power, unweighted

All the current features of the previous units have been retained, including Peavey’s patented

compression system and the very flexible back-panel patching capabilities. The

speed fan cooling system has been improved to automatically provide additional cooling for the

two-ohm load conditions.

FEATURES

Separate power transformers and circuit breakers for each channel
Automatic two-speed fan cooling system/tunnel
Independent channel thermal/fault protection

Transient-free turn-on/off operation (relay)
Two “back-porch” crossover “island” sockets for plug-in modules
Two “back-porch” balanced-input transformer sockets for PL-2’s

Single XLR and dual phone plug inputs each channel
XLR input can be transformer-balanced
Dual phone plug and

binding post outputs each channel

High temperature shutdown LED each channel

activation LED each channel

Ten-segment, tri-colored power level LED array each channel

input attenuator control each channel

Rear panel DDT

defeat and bridge mode select slide switches

3