Polaroid CCD Camera User Manual
Page 53
Appendix A - Connector Pinouts
Page 49
A. Appendix A - Connector ad Cables
This appendix describes the various connectors and cables used with the ST-
7E/8E/9E/10E/1001E.
A.1.
Appendix A - Connector Pinouts
Tables A1 and A2 below show the pin-outs of the Telescope and Power connectors on the ST-
7E/8E/9E.
Pin Number
Function
1
Chassis Ground
2
CFW-8 Pulse/AO-7 Data Out
3
Plus X (Active Low Open Drain)
9
4
Plus Y (Active Low Open Drain)
5
Signal Ground
6
Minus X (Active Low Open Drain)
7
Minus Y (Active LowOpen Drain)
8
+12 Volts Out (100mA max)
9
+5 Volts Out (300 mA max)
Shell
Chassis Ground
Table A1 Telescope Connector
Pin Number
Function
6, Shell
Earth Ground
5
DC Ground
4
-12V DC, 100mA
3
No contact
2
+12V DC, 500mA
1
+5V DC, 2A
Table A2 Power Connector
Ground in Center
+12VDC on outside
Mating plug is 5.5mm
outside and 2.1mm inside
Figure A1 - Cooling Booster DC Power Jack
A.2.
SBIG Tracking Interface Cable (TIC-78)
Many of the newer telescopes have a phone-jack connector on the drive corrector for
connecting directly to the ST-7E/8E/9E/10E/1001E Camera's Telescope Port. These include
9
The Open Drain outputs can sink 100 mA maximum