Pioneer DEH-P6300R - Manual (Page 53)

A Title (English)
52
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Initial Setting Menu Functions
The Initial Setting Menu features the following functions.
Changing the FM Tuning Step (FM)
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to
100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
1. Press the FUNCTION button and select the FM Tuning Step mode (FM) in
the Initial Setting Menu.
Note:
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Setting the DAB Priority Function (DAB)
When a Hide-away DAB tuner (e.g. GEX-P700DAB) is connected, you can set the
product in this mode so that the interruption of traffic information from the Hide-away
DAB tuner takes precedence over this product’s RDS Traffic Announcement (TA)
function.
7 When it is ON
During DAB reception, when the selected Service Component supports Road Traffic
Flashes and Transport Flashes, reception is not interrupted by this product’s RDS Traffic
Announcement (TA).
7 When it is OFF
Interruption is by the first received news flash from among this product’s RDS and the
hide-away DAB traffic information broadcasts.
1. Press the FUNCTION button and select the DAB Priority Setting mode
(DAB) in the Initial Setting Menu.
Note:
• You can only select to the DAB Priority Setting mode when a separately sold Hide-away DAB
tuner (e.g. GEX-P700DAB) is connected.
2. Switch the DAB Priority
Setting ON/OFF with the
5/∞
buttons.
2. Select the desired tuning step
with the
2/3 buttons.