Philips DVD701 - Manual (Page 4)

14 PREPARATION
Preparation
General notes
- Depending on your TV and other equipment you wish to connect,
there are various ways you could connect the player. Possible
connections are shown in the following drawings.
Please refer to the manuals of your TV,VCR, Stereo System or other
devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR.The video
quality could be distorted by the copy protection system.
- For better sound reproduction, connect the player’s audio out jacks
to the audio in jacks of your amplifier, receiver, stereo or A/V
equipment. See ‘Connecting to optional equipment’.
Caution: Do not connect the player’s audio out jack to the
phono in jack of your audio system.
Connecting to a TV
S-Video connection.
1 Connect the S-Video connector on the rear of the player to the
corresponding connector on the TV using the S-Video cable (not
supplied).
2 Connect the audio Left and Right channel sockets on the player rear
panel to the corresponding sockets on your TV or stereo system (e.g.
AUX, CD, etc.).
Video CVBS connection
1 Connect the Video socket on the rear of the player to the
corresponding socket on the TV using the cable supplied.
2 Connect the audio Left and Right channel sockets on the rear of the
player to the corresponding sockets on the TV using the cable supplied.
Alternatively, you can use the same cable to connect the audio Left and
Right sockets on the rear of the player to the corresponding sockets on
your TV or stereo system (e.g. AUX, CD, etc.).
L R CVBS
VIDEO OUT COAXIAL AUDIO
1
DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS 1
2 2
Y/C
S-VIDEO OUT
VIDEO
IN
A/V CABLE
AUDIO
IN
TV
S-VIDEO CABLE
TV
L R CVBS
VIDEO OUT COAXIAL AUDIO
1
DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS 1
2 2
Y/C
S-VIDEO OUT